Products

110V 220V  mine lighting strip is designed for working in subway, tunnel , bridge ,underground ,mine road  etc.

With our professional designed PCB which can afford longer run like 50meters, even 100meters, it can emit bright lighting at lower power consumption. It is packed by thicker  and higher  transparency  PVC  which make it work in super low or high temperature working normally and stable.

Features:

1. Get passed CE/ROHS certification

2, Low temperature resistance -25℃, high temperature resistance +80℃

3, UV resistance, flame retardant grade V1-V0

4, Integrated housing molding, waterproof IP65, available for indoor &outdoor

5, High luminous efficiency, high brightness, good subsidiary lighting for site

6, Portable reel design, convenient movement and installation

7, No external power adapter, direct AC110V/220V  connecting wire, long distance running , suitable for subway, tunnel, mine, bridge ,underground mine road and other applications

110V 220V  mine lighting strip take Integrated injection connector can get perfect waterproof, safe and easy installation.

110V 220V  mine lighting strip use EU or Americal style of power cord is optional.

We provide the T-joint in the case of connecting longer strips 

110V 220V  mine lighting strip has various packing in 20m/30m/50m per drum ,  portable for working or moving on site.

110V 220V  mine lighting strip

CROSS -SECTION 

CONNECTING

SPECTRAL ANALYSIS

PACKING

CAUTIONS:

1. Each roll of LED strip light take the rectifier bridge stack and AC plug  which can connect the utility power directly. DO NOT overload. The circuit has a circuit protector to ensure its working voltage ranges ±5% of its rated parameter.

2. If you need to customize the length, it should be cut at the clipping position marked on the strip body which usually  is  1 meter per cutting.  Please take the end cap with silicone glue  at the cutting  position to get waterproof performance.

3. Do not twist the strip light  sharply and continuously in which case may cause fatigue damage to the PCB . The twisting angle should not be above 45 degrees, and do not bend the strip light in an arc less than 60mm in diameter.

4. Please install  the product in  places with good ventilation conditions. DO NOT light up the whole roll untill spread out  the lights, to get better heat dissipation . 

5. In order to ensure the life span of the strip light, DO NOT pull, crash and squeeze the strip light sharply during installation.  The installation and fixing must be firm, without flapping or swinging. 

6. Part of 110V 220V  mine lighting strip  is waterproof of IP65, and the connector part is only  for pre-fixing and protecting against electric shock when shipped from the factory; When used outdoors, the joint must be placed in an environment without water or sealed by professional electricians to ensure that the joint position will be waterproof

Welcome to consult DELIKAY 110V 220V  mine lighting strip  !

OEM customized service &Turn-key solution available!