Supplying professional strips worked in subway, tunnel, underground or mine condition in 100V OR 220V

110V 220V  mine lighting strip is a type of lighting equipment specially designed for the subway lighting, tunnel lighting, bridge lighting, underground lighting, mine road  ,factory, warehouse, workshop and other industrial places, so its application is mainly limited to the industrial field

With our professional designed PCB which can afford longer run like 50meters, even 100meters, 110V 220V  mine lighting strip can emit bright lighting at lower power consumption. It is packed by thicker  and higher  transparency  PVC  which make it work in super low or high temperature condition  and keep working normally and stable.

Features of 110V 220V  mine lighting strip:

1. Get passed CE/ROHS certification

2, Low temperature resistance -25℃, high temperature resistance +80℃

3, UV resistance, flame retardant grade V1-V0

4, Integrated housing molding, waterproof IP65, available for indoor &outdoor

5, The brightness of  mine lighting strip is generally relatively high, which can provide sufficient and bright lighting effect 

6, Portable reel design, convenient movement and installation

7, Mine lighting strip adopts high quality materials and strict production process, so its durability is strong, can run stably for a long time. In addition, it also have a high safety, the use of explosion-proof, waterproof, dustproof and other design, can effectively protect the safety of lighting equipment.

Parameter List

Why choose our 110V 220V mine lighting strip?

We use high lumen , low power consumption LED chips to decrease its heat dissipation.

110V 220V  mine lighting strip take Integrated injection connector which can get perfect waterproof, safe and easy installation.

110V 220V  mine lighting strip use various types of power cord. Fast and easy for plug-in connecting.

Please make sure the right model according to the local market requirements.

We provide the T-joint connector in the case of  longer strips working requirements. But please note the higher power supply is needed in that case.

Generally speaking, AC220 strip can get longer running due to the PCB design.  50m length is easy to work.

But AC110  strip usually get half because its PCB will afford higher current in the case of same power working. So we advise the suitable length is 25m length if AC110V strip.

If the clients has special needs we can do customized service,  just make new PCB and related electrical parts but at higher cost accordingly.

110V 220V  mine lighting strip has various packing in 20m/30m/50m per drum , it is  portable for working or moving on site. or Storage and finishing after work.

CAUTIONS :

1. Each roll of LED strip light take the rectifier bridge stack and AC plug  which can connect the utility power directly. DO NOT overload. The circuit has a circuit protector to ensure its working voltage ranges ±5% of its rated parameter.

2. If you need to customize the length, it should be cut at the clipping position marked on the strip body which usually  is  1 meter per cutting.  Please take the end cap with silicone glue  at the cutting  position to get waterproof performance.

3. Do not twist the strip light  sharply and continuously in which case may cause fatigue damage to the PCB . The twisting angle should not be above 45 degrees, and do not bend the strip light in an arc less than 60mm in diameter.

4. Please install  the product in  places with good ventilation conditions. DO NOT light up the whole roll untill spread out  the lights, to get better heat dissipation . 

5. Pay attention to the positive and negative poles of the power cord, and do not connect it wrongly. Whether the voltage of the power supply and the product are the same, so as to avoid damage to the product.

6. Part of 110V 220V  mine lighting strip  is waterproof of IP65, and the connector part is only  for pre-fixing and protecting against electric shock when shipped from the factory; When used outdoors, the joint must be placed in an environment without water or sealed by professional electricians to ensure that the joint position will be waterproof

7.In general, the price of 110V 220V  mine lighting strip is relatively higher than ordinary strips, because it uses high-quality materials and strict production processes, and the cost is high. However, it can get long service life  and can provide brighter and more comfortable lighting effects for industrial sites, it is still one of the indispensable lighting equipment in some industrial fields

Why choose us?

We are specialized in LED strips&Sign lighting supplying!  Profession. Dedication. Focus.

CERTIFICATE

WORKSHOP

For more details about the 110V 220V mine lighting strip, please consult with DELIKAY lighting sales team!